Setup, Compatibility & Care
Setup:
This washbasin is designed for countertop installation. Ensure your vanity or countertop is structurally sound and can support the weight of the basin and water. Position the basin on the vanity, mark the drain hole location, and cut the necessary opening in the countertop if required. Connect the drain fitting (45mm diameter) to the basin and the waste pipe. For faucet installation, ensure you have wall-mounted or countertop-mounted taps, as there are no pre-drilled holes in the basin itself. Seal the edges of the basin to the countertop with a suitable silicone sealant to prevent water ingress.
Compatibility:
- Drain: Compatible with standard 45mm drain fittings and traps. Recommended to use with a siphon and plug available separately.
- Faucets: Requires faucets that are either wall-mounted or designed for countertop mounting, as the basin has no tap holes.
- Vanity/Countertop: Suitable for installation on robust vanities or countertops designed to hold the basin's weight and dimensions (410 x 345 x 150 mm).
Care:
Clean the washbasin regularly using a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the sanitary ceramic surface or the light stone imitation finish. For stubborn marks, use a non-abrasive bathroom cleaner specifically designed for ceramic surfaces. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.