Fanttik X9 Ace - Mini Bike Pump

The Fanttik X9 Ace has a maximum inflation pressure of 150 PSI.

Charging time can vary depending on the power source, but a full charge typically takes approximately 2-3 hours.

No, the Fanttik X9 Ace is specifically designed and optimized for bicycle tires only.

The pump can inflate up to 8 bicycle tires on a single full charge, depending on tire size and starting pressure.

Yes, the pump typically comes with a USB charging cable.

The hose features an all-in-one rotating design. Simply insert the hose end onto the valve and twist to secure the appropriate connection for either Presta or Schrader.

Ensure the battery is charged and the hose is securely connected to the valve without leaks. If the issue persists, the pump may require servicing or replacement.

Ensure the pump is adequately charged. Connect it to a power source and check if the charging indicator lights up. Try a different USB cable or power adapter.

Check the battery level; it may be too low to complete inflation. Ensure the hose is securely attached to the valve to prevent air leaks. Clean any debris from the valve or hose connection.

Ensure the hose is attached firmly and is not leaking. Allow the pump to re-establish a connection with the tire. If the issue persists, contact customer support.

Verify you are using the correct end of the rotating hose for your valve type (Presta or Schrader). Ensure there are no obstructions in the hose fitting.