Cleenly Patio Sealer - 5L

The duration of protection varies based on traffic, weather exposure, and cleaning habits, but typically lasts for several years. Reapplication may be needed after 2-5 years.

It is generally recommended to remove any old sealants or coatings before applying the Cleenly Patio Sealer for optimal adhesion and performance.

No, the Cleenly Patio Sealer leaves an invisible finish and does not alter the surface texture, so it should not make your patio slippery.

One 5-litre bottle covers up to 50 square meters (538 sq ft), depending on the porosity and application method of the surface.

Yes, the product is suitable for internal stone floors in addition to outdoor patios and driveways.

You can apply the sealer using a brush, roller, or sprayer. Ensure even and consistent coverage across the entire surface.

Drying times can vary, but typically the sealer is touch-dry within a few hours. It's advisable to check the specific drying instructions on the product label.

Ensure the surface was thoroughly cleaned and completely dry before application. Apply a second thin, even coat if necessary, following drying times.

The surface may not have been properly prepared, or the sealer has not fully cured. Ensure adequate drying time and consider reapplying if the product is old.

This is usually temporary and resolves as the sealer fully cures. If the darkening persists, it might indicate incompatibility; test in a small area first.