Olympus FC-WR Flash Commander

No, the Olympus FC-WR is a receiver and requires the Olympus FR-WR transmitter (sold separately) to function and control flash units.

The FC-WR, via the FR-WR transmitter, can control Olympus FL-700WR flashes and commercial flash units that can be triggered remotely.

You can control an unlimited number of flash units, divided into three controllable groups.

Yes, the FC-WR, like the FL-700WR flash, features a dust-, splash-, and freezeproof design, rated for temperatures down to -10°C.

The FC-WR uses two AAA batteries, which can be either alkaline or other rechargeable types.

The FC-WR system operates with a maximum wireless range of 30 meters (approximately 98 feet).

Groups and channels are easily set and checked using the dedicated dials located on the FR-WR transmitter.

Verify that the FR-WR transmitter and FC-WR receiver are within range and properly paired. Check that flash units are correctly connected to the FR-WR and powered on. Ensure correct groups and channels are selected on the FR-WR.

Ensure there are no significant obstructions between the transmitter and receiver. Check battery levels in both the FC-WR and the connected flash units. Test on a different channel to rule out interference.

Confirm that the FC-WR is securely attached to the camera's hot shoe. Ensure the camera firmware is up to date. Try cleaning the hot shoe contacts on both the camera and the receiver.

Check the settings on the FR-WR transmitter to ensure the audible alert is enabled. Verify that the flash unit being used supports this communication feature.