Blagdon Complete Fish Pond Dip Test Kit

Test every 3 days when starting a new pond, then at least once a month, and anytime you notice fish health problems or changes in water conditions.

Perform a partial water change (25%), ensure your filter is working correctly, and consider adding a product to detoxify ammonia.

Test strips have a shelf life, usually printed on the tube. Always check the expiration date before use.

The kit tests for ammonia (toxic to fish), nitrite (toxic), nitrate (less toxic, indicates the nitrogen cycle), pH (acidity/alkalinity), carbonate hardness (KH), and general hardness (GH).

No, this kit is designed for freshwater ponds only.

Compare the colors on the test strip to the color chart on the tube to determine the levels of each parameter. Refer to the instructions for safe ranges.

High or low pH can stress fish. Use pH adjusting products to bring the pH within the safe range of 7.0-8.0.

Perform a partial water change, check your filter's efficiency, and consider adding beneficial bacteria. Nitrite is very toxic to fish.

Ensure you are comparing the strip to the color chart in good lighting. If the results are still unclear, test again with a fresh strip.

Check the expiration date on the test strip tube. Expired strips may give inaccurate readings. Also, ensure the testing method is being followed correctly.

Perform a partial water change (25%) and retest the water. Check your filtration system to ensure it is working correctly. Consider adding beneficial bacteria if ammonia and nitrite levels are elevated.

Discard the strip and start again with a fresh strip. Ensure dry hands and avoid touching the pads to prevent inaccurate readings.