Best current price£31.84from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£31.84Visit shop Eaton 026991 T0-1 Changeover switch 1pc
Visit shop17 offers from £31.84 - £126.02
View price history by clicking the chart icon.
The Eaton T0-3-15433/E is a 3-pole toggle changeover switch designed for industrial applications requiring reliable manual control of electrical circuits. It offers a key benefit of robust switching capability up to 20A at 690V AC with IP65 front protection, ensuring operational integrity in demanding environments. A potential caveat is its manual operation, requiring direct user intervention for switching states. Key features include its 3-position toggle, 6 contacts (NO/NC configuration), screw terminals, and front mounting with a 48x48 mm shield.
| Series | T0-3-15433/E |
|---|---|
| Model Part Number | 048348 |
| Brand | Eaton |
This is the model number. 'T0' refers to the Eaton Moeller series, '3' indicates 3 poles, '15433/E' specifies the exact configuration including contact type, actuator, and front plate markings.
IP65 means the front of the switch is protected against dust ingress (6) and against low-pressure jets of water from any direction (5), making it suitable for many industrial environments.
This is a 3-pole switch with 6 contacts, typically allowing control of a 3-phase circuit, with each pole having one normally open (NO) and one normally closed (NC) contact pair for switching purposes.
This switch is primarily rated for AC operational voltage (690V AC). While it might handle low-voltage DC in some specific applications, it is not designed or typically recommended for DC circuits due to different arc-quenching requirements.
Maintained switching means the switch stays in the position you set it to until you manually move it again. Momentary switching only holds the contact while the actuator is actively being pressed or held.
The switch features a 48x48 mm front shield size, indicating the required cut-out and mounting area on the control panel.
It uses screw terminals for secure electrical connections.
Ensure power is de-energized. Check for mechanical obstructions around the toggle or internal mechanism. Verify proper mounting and that the switch is not under excessive strain.
Check screw terminal connections for tightness. Ensure wires are properly stripped and seated. Inspect contacts for signs of damage or wear; if damaged, the switch may need replacement.
De-energize the circuit. Ensure the wire gauge is appropriate for the `20A` rating and that terminals are securely tightened. Clean any corrosion. If overheating persists, the switch may be overloaded or faulty.
De-energize the circuit. Inspect the extent of the damage. Minor cosmetic damage may not affect function, but significant damage to the toggle mechanism or housing indicates the need for replacement.
Setup:
Compatibility:
Care:
