Sealey Battery Terminal Crimping Tool - AK422

The Sealey AK422 is designed to crimp battery terminals with cross-sectional areas of 6, 10, 16, 25, 35, and 50mm².

You can use it with either a hammer strike on the punch end or by securing it in a vice and applying pressure via the vice mechanism.

It is primarily designed for standard battery terminals that are intended for crimping. Ensure your terminals match the specified size range.

The product information does not specify any included accessories. It is typically sold as the tool itself.

Use the correct tool setting for your terminal size, ensure the terminal is fully seated in the throat, and apply firm, consistent force. A properly crimped terminal will be tightly secured and show deformation from the crimping action.

While it is designed for battery terminals, it is generally suitable for crimping copper lugs of the specified sizes if they are intended for this type of compression.

Ensure the correct terminal size is used for the tool's setting. Verify that sufficient force was applied during the crimping process. Check for any obstructions in the tool's throat or punch mechanism.

Check for dirt or debris within the mechanism. Ensure the tool is properly aligned if using a vice. For hammer operation, ensure a firm and direct strike.

Confirm you are using the correct setting for the terminal size. Ensure the terminal is properly seated within the throat before applying force. Excessive force beyond what is needed can also cause damage.