Best current price£12.70from Amazon
Shopping.co.uk recommended and popular offers
Amazon£12.70Visit shop Eagle Soldering Iron Kit With 30W Round Tipped Iron, Holder With Sponge, Desolder Pump, 10G Solder Wire For Diy, Professional, School
Visit shop2 offers from £12.70 - £13.65
View price history by clicking the chart icon.
The Eagle 30W Soldering Iron Kit is designed for hobbyists, electronics enthusiasts, and DIYers who need a reliable, all-in-one solution for circuit board repairs and radio control maintenance. This kit provides excellent value by including essential accessories like a stand, solder pump, and wire, making it ready for immediate use. While it is perfect for light-duty precision tasks, users should note that the 3.5-minute heat-up time is slower than premium industrial-grade stations, requiring a bit of patience before starting your project.
| Model Part Number | Y061KFA |
|---|---|
| Brand | Eagle |
No, this model activates as soon as it is plugged into a power source.
No, this iron is designed specifically for small electronics and circuit boards. It lacks the heat output required for those tasks.
The iron comes with a 1.2-meter extra-flexible cable.
Yes, the tip is designed for longevity, but can be replaced if damaged by misuse.
The unit operates on standard 230V AC mains power.
Check that the plug is fully inserted into the 230V socket and verify if the outlet has power.
Clean the tip with a damp sponge and apply a small amount of fresh solder to 're-tin' the surface.
Clear any solidified solder debris from the nozzle and ensure the internal piston seals are free of dust.
Setup: Ensure the soldering iron is placed on the provided metal stand on a heat-resistant surface before plugging the 1.2m lead into a standard 230V AC outlet. Allow the tool to stabilize for at least 3-4 minutes.
Compatibility: This unit is intended for standard leaded or lead-free electronics solder. It is not designed for industrial brazing or high-thermal-mass objects like metal pipes.
Care: Keep the tip clean by wiping it on a damp sponge or brass wire cleaner during use. Always tin the tip with a thin layer of solder before turning the unit off to prevent oxidation. Never attempt to file the tip, as this will damage the protective coating and ruin the heating element's performance.
