Volden White Self-Adhesive Draught Seal - B&Q - Volden

Protect your home from the elements with our durable EDPM draught seals. These high-performance se...

Best current price£6.00from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£6.00Visit shop

B&Q - White Self-Adhesive Draught Seal (L)6M (W)9mm (T)3.5mm

Visit shop

One Offer

1 offer from £6.00

View price history by clicking the chart icon.

B&QB&Q - White Self-Adhesive Draught Seal (L)6M (W)9mm (T)3.5mm

Free delivery in 1–3 days

£6.00

Visit shop

Product Information

Full details

This guide is for homeowners and DIY enthusiasts looking to improve home insulation and energy efficiency. The Volden White Self-Adhesive Draught Seal offers a durable, long-lasting solution to block drafts, reduce noise, and prevent water infiltration, keeping your home comfortable and secure. A key consideration is that it is best suited for smooth, clean surfaces for optimal adhesion.

All features

Model Part Number	Volden
Brand	B&Q

Extended Product Information

FAQs

What material is the draught seal made from?

The draught seal is made from durable EPDM (Ethylene Propylene Diene Monomer) rubber, which is known for its excellent weather resistance and longevity.

Is this draught seal suitable for outdoor use?

Yes, the EPDM material is designed to withstand harsh weather conditions, making it suitable for outdoor applications like sealing around exterior doors and windows.

Can I use this draught seal on painted wood?

Yes, it can be used on smooth, painted wood surfaces. Ensure the paint is well-adhered and the surface is clean and dry for best results.

How wide is the draught seal?

The product description does not specify the exact width, but it is designed to seal typical gaps around doors and windows.

Do I need any special tools to install it?

No special tools are required. You will need sharp scissors or a utility knife to cut the seal to the desired length and a clean cloth for surface preparation.

How long will the seal last?

Due to its durable EPDM construction and weather-resistant properties, the seal is designed for long-lasting performance under normal conditions.

Can this seal be painted over?

The product information does not recommend painting over the seal, as it may affect its flexibility and adhesion.

Troubleshooting

Draught seal is not sticking properly

Ensure the surface is thoroughly cleaned, dry, and smooth before application. Re-clean the surface and reapply the seal, pressing firmly.

Draught seal peels away at edges

This may indicate insufficient pressure during application or an uneven surface. Press down firmly along the entire length, paying special attention to the edges. Consider using a small amount of appropriate adhesive if the issue persists on a suitable surface.

Reduced effectiveness over time

Clean the seal gently with a damp cloth. If the adhesive has lost its tack due to prolonged exposure or contamination, replacement may be necessary.

Pros and Cons

Pros

Provides effective draft-proofing, improving energy efficiency.
Easy to install with its self-adhesive backing.
Durable EPDM material offers long-lasting protection.
Helps to reduce noise pollution from outside.
Resistant to various weather conditions.

Cons

Requires a clean and smooth surface for optimal adhesion.
May require replacement if the adhesive surface becomes dirty or loses tack.
Primarily designed for sealing gaps, not for structural reinforcement.

Setup, Compatibility & Care

Setup:

Clean the Surface: Ensure the area where the seal will be applied is clean, dry, and free from dust, grease, or loose paint. Wipe down with a mild cleaner and allow it to dry completely.
Measure and Cut: Measure the length of the gap you need to seal. Cut the draught seal to the required length using sharp scissors or a utility knife.
Apply the Seal: Peel back a small section of the protective backing from the adhesive. Carefully press the seal into place, ensuring good contact with the surface. Continue to peel the backing and press the seal firmly as you go, working from one end to the other.
Ensure Firm Adhesion: Once applied, press down firmly along the entire length of the seal to activate the adhesive.

Compatibility:

This draught seal is best suited for application on smooth, non-porous surfaces such as painted wood, metal, uPVC, and some plastics. It may not adhere effectively to rough, textured, or dirty surfaces.

Care:

To maintain the seal's effectiveness, periodically wipe it with a damp cloth to remove any accumulated dirt or grime. Avoid using harsh chemicals or abrasive cleaners, as these can damage the EPDM material or its adhesive backing.