Peel Away Poultice Paint Remover Trial Pack - B&Q

Peel Away is suitable for use on woodwork, brickwork, masonry, plaster, hardwoods, stone, metal, and marine fibreglass.

Peel Away 1 is designed for oil-based and lead-containing paints, while Peel Away 7 is formulated for modern, water-based, and solvent-based paints and varnishes.

Dwell time varies depending on the paint type and the product instructions; always follow the instructions included with your product.

Peel Away is free from harmful chemicals like methylene chloride and caustic soda, but always wear appropriate PPE and follow safety instructions.

Dispose of the removed paint and poultice properly, following local regulations for hazardous waste.

You will need the Peel Away formula, a plastic scraper, gloves, eye protection, a respirator, and the provided membrane.

The membrane is designed for single use to ensure effectiveness; dispose of it along with the removed paint.

Make sure you've selected the correct formula for your paint type and followed the instructions carefully. Extend the dwell time if necessary.

Ensure the correct Peel Away formula was used for the paint type. Extend the dwell time, and reapply if necessary.

Ensure the membrane is properly applied and sealed to prevent drying. If it dries, re-wet the poultice.

Clean the surface thoroughly with water or a recommended cleaner to remove any remaining residue.