Best current price£126.28from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£126.28Visit shop Clarke 6500413 Cs4-6E Belt & Disc Sander
Visit shop
B&Q£136.42Visit shop B&Q - Clarke Cs4-6E Belt & Disc Sander
Visit shop
eBay£136.99Visit shop Clarke CS4-6E Belt & Disc Sander, View Video
Visit shop6 offers from £126.28 - £147.99
View price history by clicking the chart icon.
The Clarke International CS4-6E Belt & Disc Sander is designed for hobbyists and small workshops needing a versatile machine for shaping and finishing wood, plastics, and non-ferrous metals. Its key benefit is the dual functionality, allowing seamless switching between belt and disc sanding operations. A potential caveat for some users might be the dust extraction port size, requiring specific adaptors for some shop vacuums.
| Model Part Number | 6500413 |
|---|---|
| Brand | Clarke International |
This sander is ideal for working with woods, most plastics, and non-ferrous metals.
The sanding belt can be tilted and locked at any angle between 0 and 90 degrees using the designated adjustment mechanism.
The sander features a 60mm diameter dust extraction port.
Yes, the removable sanding table (225 x 160mm) can be used interchangeably with both the sanding belt and the disc.
The sander is equipped with a 370 Watt, 230V motor.
The 6-inch (150mm) diameter disc rotates at 2850 rpm.
The sanding belt measures 4 inches by 36 inches (100 x 914mm) and runs at 450 m/min.
Adjust the tracking knob on the sander to guide the belt towards the center of the rollers. Ensure the belt is installed correctly and has proper tension.
Ensure the air vents are clear of dust and debris. Do not overload the sander by applying excessive pressure. Allow the motor to cool down if it becomes excessively hot.
Check if the sanding belt or disc is worn out and replace it. Ensure the correct grit of sandpaper is being used for the material and task. Verify the belt is running at the correct speed.
Ensure the sander is placed on a stable surface. Check that the sanding belt and disc are securely attached and balanced. Inspect for any loose parts or damage.
Setup: Ensure the sander is placed on a stable, level workbench. Connect the power cord to a suitable 230V outlet. Attach the sanding belt and disc according to the manufacturer's instructions, ensuring proper tension and alignment. For optimal dust collection, connect a vacuum cleaner or dust extractor to the 60mm port, potentially using an appropriate adapter.
Compatibility: This sander is designed for use with woods, most plastics, and non-ferrous metals. Always use sanding belts and discs appropriate for the material being worked on and ensure they are the correct size for the machine.
Care: Regularly clean the machine to prevent dust buildup, paying particular attention to the motor vents and sanding surfaces. Check sanding belts and discs for wear and replace them as needed. Ensure the dust extraction port is clear. Periodically check that all knobs and locks are secure.
