Securfix Drywall Screws - Black

These screws are designed for fastening drywall sheets to wood or metal studs, common in construction and renovation projects.

A bugle head is shaped like the bell of a bugle, allowing it to countersink smoothly into drywall without tearing the paper, creating a flush surface for finishing.

While primarily designed for wood, the coarse thread can offer some holding power in thinner gauge metal studs. For thicker metal studs, self-tapping screws might be more appropriate.

Each box contains 200 Securfix Drywall Screws.

The black phosphate finish provides increased durability and resistance to corrosion, helping to prevent rust and extend the life of the screw.

While they are specifically designed for drywall, their coarse thread and durable finish may make them suitable for some light-duty wood-to-wood applications where a flush finish is not critical.

Use a good quality Phillips bit that fits snugly, apply consistent downward pressure, and drive the screw at a moderate, controlled speed. Avoid over-tightening.

Ensure you are using the correct size Phillips bit and applying firm, steady pressure. Reduce the speed of your drill if using a power tool. If the head is already stripped, try using a screw extractor or a rubber band between the bit and the screw head for added grip.

This can happen if the screw is driven too fast or too deep. Back the screw out slightly and re-drive it at a slower speed, ensuring the bugle head is just flush with the surface. Avoid over-driving.

Verify that the screw is penetrating adequately into the wood stud behind the drywall. If screwing only into drywall, consider using drywall anchors. Ensure the thread is engaging properly with the material.

Although the black phosphate finish offers corrosion resistance, prolonged exposure to moisture can still lead to rust. Store the screws in a dry place and ensure the installation environment is not excessively humid.