Saber Masonry Drill Bit Set - 5

These drill bits are designed for use on masonry, stonework, brick, and similar materials.

Start with a slower speed and increase as needed, always applying even pressure. The optimal speed depends on the material and the size of the bit.

Select the drill bit size that matches the size of the screws or anchors you will be using for your project. If unsure, start with a smaller size and gradually increase.

Clean the drill bits after each use with a wire brush to remove debris. Store them in a dry place to prevent rust and damage.

Stop the drill immediately. Try reversing the drill to remove the bit. If it's still stuck, carefully use pliers to remove it, taking care not to damage the bit.

Check if the drill bit is the correct type for the material. Ensure you are using the correct speed and applying consistent pressure. Check the drill bit for wear and tear; replace if necessary.

Reduce the drill speed and apply less pressure. Use a pilot hole if necessary.