Vent-Axia Silhouette Extractor Fan - Timer - 100mm - White ABS
The Vent-Axia Silhouette 100mm Extractor Fan in White ABS is a stylish and discreet solution for i...The Vent-Axia Silhouette 100mm Extractor Fan in White ABS is a stylish and discreet solution for improving ventilation in bathrooms, toilets, or cloakrooms. It features an ultra-slim profile with a 17mm grille that blends seamlessly with wall surfaces for unobtrusive installation. This axial fan operates quietly with a noise level of 30dBA at 3m and has an extraction rate of 75m³/hr, powered by a 2662rpm motor. The fan includes an adjustable overrun timer, from 5 to 30 minutes, an indication light, and a backdraft shutter. It is suitable for wall, ceiling, or panel mounting, with a wall kit available separately (code 83154). The unit is IPX4 rated for safe use in wet areas and complies with Building Regulation Documents F and L. Dimensions are HWD: 163 x 165 x 90mm.
This guide is for homeowners and installers looking to improve bathroom, toilet, or cloakroom ventilation with the Vent-Axia Silhouette 100mm Extractor Fan. The key benefit is its stylish, discreet design with effective air extraction. A possible caveat is that you'll need to purchase a wall kit separately. This fan features an ultra-slim profile, quiet operation, adjustable overrun timer, and is designed for easy installation.
All features
Model Part Number
454056
Brand
Vent-Axia
Extended Product Information
FAQs
How do I adjust the overrun timer?
The timer can be adjusted during installation. Refer to the manual for specific instructions on setting the desired run-on time.
What is the noise level of the fan?
The fan operates at a noise level of 30dBA at 3 meters.
Where can I mount the fan?
The fan is suitable for wall, ceiling, or panel mounting.
Is a wall kit included?
No, the wall kit is available separately. (code 83154)
Is the fan suitable for use in wet areas?
Yes, the fan has an IPX4 rating, making it suitable for use in bathrooms and other wet areas.
What is the extraction rate?
The fan has an extraction rate of 75m³/hr.
What are the dimensions of the fan?
The dimensions are HWD: 163 x 165 x 90mm.
Troubleshooting
Fan does not turn on.
Check the power supply and ensure the fan is properly wired. Verify the circuit breaker has not tripped.
Fan is not extracting air effectively.
Check for obstructions in the ducting or fan blades. Clean the fan and ensure the backdraft shutter is functioning correctly.
Fan is noisy.
Check for any loose components or obstructions. Ensure the fan is mounted securely. If the noise persists, it may indicate a motor issue.
Timer is not functioning.
Check the timer settings and wiring. If the issue persists, the timer may need to be replaced.
Pros and Cons
Pros
Stylish and unobtrusive design.
Quiet operation for a more comfortable environment.
Efficient extraction rate to improve air quality.
Adjustable timer for convenience and energy saving.
Easy to install in various locations.
Water-resistant design for safety.
Cons
Wall kit must be purchased separately.
Installation requires some basic electrical knowledge.
Extraction rate may not be sufficient for very large rooms.
The fan is not designed for continuous operation.
Requires regular cleaning to maintain performance.
Setup, Compatibility & Care
Setup:
Ensure the power supply is switched off before beginning installation.
Refer to the included installation manual for detailed instructions.
The fan can be mounted on a wall, ceiling, or panel. A wall kit is available separately.
Connect the wiring according to the wiring diagram.
Set the overrun timer to the desired duration.
Compatibility:
Compatible with standard 100mm ducting.
Suitable for use in bathrooms, toilets, and cloakrooms.
Complies with Building Regulation Documents F and L.
Care:
Regularly clean the fan grille and blades with a damp cloth.
Do not use abrasive cleaners.
Ensure the fan is free from obstructions.
Check and clean the backdraft shutter periodically.