Shopping.co.uk

Irwin Gilbow G67 Left Hand Universal Tin Snips - 280mm

Irwin Gilbow G67 Left Hand Universal Tin Snips - 280mm

The IRWIN Gilbow G67 is a left hand cranked shear suitable for straight cutting and off cutting in...

Best current price£53.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £53.99 - £57.39

View price history by clicking the chart icon.

eBayIRWINGilbow TG67 G67 Left Hand Universal Tin Snips 280mm (11in)
Free delivery in 1–3 days
£53.99
Visit shop
AmazonIrwin Bunt Gilbow G67 Left Hand Universal Tin Snip 11-Inch, Iwtg67
Free delivery in 1–3 days
£57.39
Visit shop

Product Information

Full details

This guide provides comprehensive information on the Irwin Gilbow G67 Left Hand Universal Tin Snips. Designed for professionals and DIY enthusiasts, these snips offer precise and efficient cutting of sheet metal. A key benefit is the ability to make clean, accurate cuts with minimal effort. However, these snips are specifically designed for left-handed users, so right-handed users may find them challenging to use.

All features

Model Part NumberG67
BrandGilbow

Extended Product Information

FAQs

What materials can I cut with these snips?

These snips are designed for cutting sheet metal and similar materials.

Are these snips suitable for right-handed users?

No, these snips are specifically designed for left-handed users.

How do I maintain the blades?

Clean the blades after each use and apply a light coat of oil to prevent rust.

What should I do if the joint becomes loose?

Tighten the nut and bolt joint.

Can I use these snips for cutting thick materials?

It is not recommended to use these snips for materials thicker than their rated capacity.

What is the cutting direction?

These snips are for straight cutting and off-cutting in a clockwise direction.

What safety precautions should I take?

Wear safety glasses and gloves when using these snips.

Troubleshooting

Snips are not cutting cleanly.

Check for any damage on the blades, and sharpen or replace the blades if necessary. Ensure the material isn't too thick for the snips.

The joint is loose or wobbly.

Tighten the nut and bolt joint. If the joint is damaged, consider replacing the snips.

Snips are difficult to operate.

Ensure the blades are clean and lubricated. Check for any obstructions hindering the cutting action.

Pros and Cons

Pros

  • Clean, precise cuts on sheet metal.
  • Durable construction with a nut and bolt joint.
  • Specifically designed for left-handed users, improving comfort and control.
  • Hollow ground jaw faces for extended life.
  • Suitable for straight and off-cutting tasks.
  • Efficient and easy to use.

Cons

  • Specifically designed for left-handed users only.
  • May require more effort for thicker materials.
  • Requires proper maintenance to maintain cutting performance.
  • Not suitable for cutting extremely hard materials.
  • May not be ideal for intricate or detailed cuts.
  • Limited to clockwise cutting direction.

Setup, Compatibility & Care

These snips require no special setup; they are ready to use out of the box. Ensure the cutting area is clear of obstructions. Regular maintenance will prolong the life of your snips. After each use, clean the blades with a cloth to remove debris. Apply a light coat of oil to the cutting edges to prevent rust and maintain sharpness. Store the snips in a dry place to prevent corrosion. Ensure that you are wearing appropriate safety gear, including eye protection and gloves. Compatibility is limited to sheet metal and similar materials. Avoid cutting materials beyond the snips' specified capacity.

Price History

DatePrice
Visit shop