Fujifilm Instax Mini 12 Instant Camera - Clay White

The Instax Mini 12 exclusively uses Fujifilm Instax Mini Instant Film, which produces credit-card sized prints.

Each Instax Mini film pack typically contains 10 exposures.

The Instax Mini 12 features automatic flash, which fires based on ambient light conditions. There is no manual option to turn off the flash.

The camera has an exposure counter display on the back that shows how many photos remain in the current film pack.

Instax Mini prints are not waterproof. Avoid exposing them to water or excessive moisture to preserve their quality.

Photos typically start to develop within 90 seconds and fully develop over several minutes, depending on the temperature.

No, the Instax Mini 12 does not have a built-in self-timer function.

Check if the AA batteries are correctly inserted with the right polarity. Replace with fresh batteries if needed, as low battery power can prevent the camera from operating.

Ensure the film pack is not expired and has been stored correctly. Check if the flash window or lens is obstructed. In very dark environments, even with auto flash, results can be challenging. Avoid shooting directly into bright lights which can confuse the exposure sensor.

Ensure the film pack is fully seated and properly aligned. If a photo gets stuck, gently try to retrieve it without forcing the mechanism. Do not open the film compartment while film is loaded unless necessary, as it can ruin the film. Replace the film pack if issues persist.

Confirm you are using the correct mode for your subject distance. For subjects 30-50cm away, twist the lens to activate close-up mode. For other distances, ensure your subject is within the camera's normal focusing range. Keep the camera steady when pressing the shutter button.

This can sometimes indicate issues with the film rollers. Ensure the rollers are clean (gently wipe if accessible with power off). It could also be debris on the film itself or a faulty film pack. Try a new film pack.