Thermal Paste - 220 C Rating - 30G Tube

A pea-sized amount applied to the center of the CPU or GPU is generally recommended. The pressure from mounting the heatsink will spread the paste evenly. Avoid over-application.

It is recommended to reapply thermal paste every 2-5 years, or sooner if you notice a significant increase in component temperatures or experience thermal throttling.

Yes, if the SSD or storage device has a heat spreader or components that generate significant heat and require efficient thermal transfer, this paste can be used.

The product description does not specify electrical conductivity. Users should exercise caution and avoid direct contact with sensitive electrical components to prevent potential short circuits.

The 220°C rating indicates the maximum operating temperature the thermal paste can withstand while maintaining its thermal transfer properties effectively.

Use a lint-free cloth or coffee filter lightly dampened with isopropyl alcohol (90% or higher concentration). Gently wipe the surface until all residue is removed, then allow it to air dry completely before applying new paste.

When stored properly in its original sealed syringe in a cool, dry place, the thermal paste should maintain its properties for several years. Refer to the manufacturer's packaging for specific date information if available.

Ensure the syringe tip is properly attached and the internal seal is removed. Gently warm the syringe slightly by holding it in your hand for a minute if the ambient temperature is very cold.

Check that the heatsink is mounted correctly with even pressure. Ensure no excessive paste was used, which can sometimes hinder heat transfer. Reapply if necessary after thoroughly cleaning both surfaces.

This paste is designed for high temperatures, but extreme or prolonged dry conditions at ambient temperature might affect consistency. Ensure the cap is sealed tightly when not in use and stored as recommended.