Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop 2x Bartoline Plastic Primer Quick Dry Plastic Paint Adhesion White Topcoat 400mL
Visit shop
B&Q£27.99Visit shop B&Q - 2X Plastic Primer Quick Dry Plastic Paint Adhesion White Topcoat 400Ml
Visit shop3 offers from £16.99 - £27.99
View price history by clicking the chart icon.
Bartoline Plastic Primer is an essential solution for DIY enthusiasts, automotive hobbyists, and homeowners looking to refinish rigid plastic items. It provides superior adhesion and a smooth base for topcoats on materials like PVC, resin, and fiberglass, though it requires specific environmental conditions and careful application to achieve professional results.
| Colour | White |
|---|---|
| Model Part Number | PP4521 |
| Brand | Bartoline |
| Container Volume | 400ml |
No, this primer is specifically formulated for rigid plastics like PVC, polypropylene, resin, and fiberglass.
For best results, apply 2-3 thin coats, allowing 15-20 minutes of drying time between each.
Allow 24 hours for the primer to fully harden before applying a final topcoat.
No, this product should only be used outdoors or in a very well-ventilated area due to the nature of the aerosol.
The product performs optimally at ambient temperatures between 15C and 25C.
While the primer has superior adhesion, ensuring the surface is clean and free of contaminants is the most important step; light sanding can improve results on very smooth or glossy plastics.
If the nozzle is blocked, attempt to clear it by inverting the can and spraying. If it remains clogged, soak the nozzle in a suitable solvent or replace it.
You are likely holding the can too close or applying coats that are too thick. Increase the distance to 15-25cm and apply thinner, lighter layers.
The surface was likely not clean enough. Ensure all oil, grease, and dirt are removed with a degreaser before application.
To ensure success, work only in temperatures between 15C and 25C in a well-ventilated area. Before beginning, ensure your workspace is shielded from direct sunlight, as high heat can affect the drying process and surface finish. Shake the canister vigorously for approximately 2 minutes before starting and periodically during use to maintain formula consistency. After you have finished your project, perform the critical 'clear-out' step: invert the can and spray for 2-5 seconds. This clears the internal dip tube and nozzle, preventing the primer from hardening inside the mechanism during storage. Store the container in a cool, dry location to preserve its shelf life.
