Best current price£16.98from eBay
Shopping.co.uk recommended and popular offers
eBay£16.98Visit shop LASER 8533 Adjustable Nozzle Oil Dispenser Bottle 500 ml For Oils & Lubricants
Visit shop3 offers from £16.98 - £17.01
View price history by clicking the chart icon.
This 500ml oil dispensing bottle from Laser Tools is designed for mechanics and DIY enthusiasts needing precise oil application. Its key benefit is an adjustable nozzle for controlled reach and flow, with a leak-preventing closure. A potential caveat is that it's optimized for specific fluids, so always check compatibility.
| Model Part Number | 8533 |
|---|---|
| Brand | Laser |
The Laser Tools Oiler 8533 has a capacity of 500ml.
This bottle is designed for motor oil, diesel, and lubricants. It is not recommended for use with gasoline due to potential material incompatibility and safety concerns.
The nozzle can typically be adjusted for reach and oil flow by gently twisting or pulling it. Refer to specific markings or instructions if available on the product.
The nozzle is designed to close securely when not in use to prevent leaks. Ensure it is fully closed before storing or transporting.
Yes, additional sizes are available: 125ml (Part No. 8531) and 250ml (Part No. 8532).
Empty the bottle and clean with mild soap and water. Ensure the nozzle is clear of debris. Wipe the exterior with a damp cloth. Allow to dry completely before refilling or storing.
The bottle is manufactured from PE-HD (High-Density Polyethylene) plastic.
Ensure the nozzle is clean and free of dried oil or debris. A gentle wiggle or a small amount of compatible lubricant on the adjustment mechanism might help. If the issue persists, check for internal blockages.
Verify that the nozzle is fully closed and seated correctly. Check the seal or O-ring (if applicable) for damage or debris. Clean the sealing surfaces.
Ensure the bottle is held upright and the nozzle is properly submerged in the fluid. Check for air bubbles or blockages in the nozzle or internal tube. Agitate the bottle gently if needed.
Confirm that the fluid being dispensed is compatible with PE-HD plastic. Refer to the product information and avoid using incompatible chemicals.
Setup: Simply fill the bottle with your desired compatible fluid through the top opening. Ensure the nozzle is properly attached. Adjust the nozzle by gently twisting or pulling to set the desired reach and flow.
Compatibility: This bottle is manufactured from PE-HD plastic, making it suitable for use with motor oil, diesel, and general lubricants. It is not recommended for use with aggressive solvents, paints, or highly corrosive chemicals.
Care: After each use, it is recommended to empty any remaining fluid. Clean the inside of the bottle with a mild detergent and water if switching between different types of oils or lubricants. Ensure the nozzle is clear of any debris. Wipe the exterior with a damp cloth. Store with the nozzle closed to prevent leaks.
