Setup, Compatibility & Care
- Assembly: Attach the paint container to the spray gun. Ensure all parts are securely connected.
- Paint Preparation: Thin the paint according to the manufacturer's instructions, especially if it's thick. The W 100 is designed for paints up to 90 DIN-sec viscosity.
- Filling the Tank: Pour the prepared paint into the 800ml tank. Avoid overfilling.
- Power On: Plug the sprayer into a power outlet and turn it on.
- Adjust Settings: Select the appropriate spray jet setting and adjust the paint flow for your project.
- Spraying: Hold the sprayer at a consistent distance (approx. 15-20 cm) from the surface and move it evenly. Overlap each pass slightly.
Compatibility
The Wagner W 100 is compatible with solvent and water-based paints, including wood preservatives, stains, varnishes, and more. Always check the paint's label for suitability.
Care
- Cleaning: After each use, detach the gun and clean it thoroughly with the appropriate solvent or water, depending on the paint used. Follow the cleaning instructions in the manual.
- Storage: Store the sprayer in a clean, dry place. Drain any remaining paint from the tank and gun before storage.