Best current price£163.92from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£163.92Visit shop Schneider Electric Powertag Energy P63 3Pn Wireless Sensor 63A - A9mem1571
Visit shop1 offer from £163.92
View price history by clicking the chart icon.
The Schneider Electric PowerTag Energy P63 3PN (A9MEM1571) is a wireless energy sensor for 3P+N Acti9 and Multi9 devices, offering real-time electrical measurements up to 63A. It's ideal for facility managers and electricians needing detailed circuit monitoring and load diagnostics to prevent downtime, though it requires a compatible gateway for data transmission. Key features include active energy and power tracking, per-phase current monitoring, and power loss alerts.
| Model Part Number | A9MEM1571 |
|---|---|
| Brand | Schneider Electric |
The PowerTag Energy P63 3PN is rated for a maximum current of 63A.
Yes, a compatible Schneider Electric gateway is required for the sensor to communicate wirelessly and transmit data for monitoring and diagnostics.
It is designed for 3-phase + neutral (3P+N) configurations with 9mm phase-neutral spacing, specifically for Schneider Electric Acti9 and Multi9 devices.
No, the PowerTag Energy P63 3PN is a wireless sensor and does not have an integrated display. Readings are accessed through the connected gateway and Schneider Electric's monitoring software.
It provides alerts for power loss events, including per-phase current values just before the shutdown, which is crucial for diagnosing the cause of the interruption.
While it provides detailed energy data, its primary design and compatibility are with Schneider Electric's Acti9 and Multi9 industrial and commercial electrical panels. It may be used in advanced residential setups requiring detailed circuit monitoring.
This product is compliant with the IEC 61557-12 standard, specifically identified as PMD-I/DD/K55/1.
Verify the gateway is powered on and within wireless range. Check that the sensor is correctly paired with the gateway and that the gateway is configured properly in the monitoring software. Ensure no physical obstructions are blocking the wireless signal.
Confirm the sensor is correctly installed on the 3P+N device with proper phase-neutral spacing. Ensure the circuit is within the 63A rating. Check for any potential interference sources affecting wireless communication.
Verify that power loss alerts are enabled in the monitoring software settings for this sensor. Ensure the sensor is actively communicating with the gateway prior to the event.
Check the power supply to the circuit the sensor is monitoring. Confirm the sensor is properly clipped onto the circuit breaker terminals. Restart the associated gateway.
Setup:
Compatibility:
Care:
