Britwall Aluminium Invisible Line Trims - Black - 3000 mm

This trim is specifically designed for 4mm thick SPC (Stone Plastic Composite) wall panels.

No, this trim is designed exclusively for internal corners to achieve an invisible line effect.

You will need appropriate metal cutting tools, such as a fine-tooth hacksaw or a metal chop saw, to achieve clean and precise cuts.

Clean with a soft, damp cloth. Avoid abrasive cleaners. A mild soap solution can be used for tougher marks, followed by drying with a soft cloth.

The long length reduces the need for multiple trims and joints, leading to easier installation and a more seamless, continuous appearance across larger areas.

The coating is designed for durability and scratch resistance, but it should be handled with care during installation to prevent accidental damage.

Please refer to the retailer or manufacturer's warranty information for specific details, as warranty periods can vary.

Verify that the SPC panels are exactly 4mm thick and that the trim is correctly oriented for an internal corner. Ensure panels are installed flush.

Check for precise cutting of the trim and ensure panels are perfectly aligned. Minor adjustments to panel seating may be required. Confirm the correct trim type for the corner angle.

Handle the trim with care during installation to avoid abrasions. If damage occurs, contact the supplier for potential replacement options, as repair of the coating is difficult.

Ensure the trim is cut straight. If the bowing is due to installation pressure, carefully adjust the seating of the SPC panels or the trim to achieve a straight line.