Best current price£20.87from Travis Perkins
Shopping.co.uk recommended and popular offers
Travis Perkins£20.87Visit shop Safeguard Dryrod Damp Proofing Rods Pack of 10
Visit shop
Amazon£24.99Visit shop Dryrod Damp Proofing Rods DPC (10 Pack) - Coverage 1.2m - BBA-Approved | Stronger Than DPC Injection Creams.BBA Approved Rising Damp Treatment in Walls.
Visit shop15 offers from £20.87 - £1,619.00
View price history by clicking the chart icon.
This guide is for homeowners and contractors seeking an effective solution for rising damp. Dryrod Damp Proofing Rods provide a simple, DIY-friendly method to create a waterproof barrier, outperforming traditional creams and liquids. However, proper installation is crucial for optimal results. This guide will cover key features, usage, and troubleshooting to help you effectively use Dryrod to protect your property.
| Brand | Dryrod |
|---|
Results can typically be seen within a few weeks, but the full drying process can take several months, depending on the wall's saturation level and environmental conditions.
Coverage depends on wall thickness. One pack of 150 rods covers up to 18m of a 9" wall. Refer to the packaging for specific coverage details.
You will need a 12mm drill bit, a drill, a measuring tape, and a knife or cutting tool.
Dryrod is generally suitable for solid brick and stone walls. For other wall types, consult a professional.
Yes, Dryrod is safe to use when following the instructions. The active ingredient is designed for diffusion into masonry, not posing a health hazard when used as directed.
Dryrod rods have a long shelf life when stored in a dry place, as the active ingredient is stable.
Yes, once the walls are fully dry, you can re-plaster and paint them as usual.
Ensure to fill the missed hole with an appropriate filling material that is compatible with the wall material, but it is best practice to install according to the instructions.
Ensure rods were inserted correctly, spacing was adequate, and the wall is drying. If dampness continues, check for other sources of moisture (leaks, condensation).
Make sure the drilled holes are the correct diameter (12mm) and clear of debris. In some instances, slightly enlarging the hole may be necessary.
Ensure the drilled holes are deep enough. Use a sharp knife or tool to trim the rod level with the mortar.
This is rare, but if it occurs, it may be due to the diffusion process. Allow time for the wall to dry completely and re-plaster and paint as needed. Contact a professional if the issue persists.
Dryrod Damp Proofing Rods are generally compatible with most types of brick and stone walls. For specific compatibility concerns, consult a building professional.
After installation, no specific care is required. Allow sufficient time for the rods to diffuse the active ingredient and for the walls to dry out. Monitor the walls for any signs of dampness and address any issues promptly. Ensure proper ventilation to assist with the drying process.
