LaCie 2big Dock v2 Thunderbolt 3 - 60TB

With a Thunderbolt 3 connection, the LaCie 2big Dock v2 can achieve speeds of up to 550MB/s.

Yes, the drive is backward compatible with USB 3.2 Gen 2, USB 3.1, and USB 3.0 ports using the USB Type-C connector, but speeds will be significantly reduced compared to Thunderbolt 3.

You can set up RAID using the LaCie Toolkit software included with the drive or through your operating system's disk management utility. Be aware that setting up RAID 0 or RAID 1 will format the drives, erasing any existing data.

Yes, the LaCie 2big Dock v2 typically includes a Thunderbolt 3 cable.

No, the LaCie 2big Dock v2 is designed as a desktop unit. It requires an external power supply and is not intended for frequent transport.

The drive features slots for CFexpress Type B, CFast 2.0, and SD memory cards.

The 60TB model contains two internal 30TB hard drives.

Ensure the Thunderbolt 3 or USB cable is securely connected at both ends. Try a different Thunderbolt 3 or USB port on your computer. Verify that the power adapter is connected and the drive is powered on. Restart your computer.

Confirm you are using a Thunderbolt 3 connection. Check if RAID 0 is configured for maximum speed. Ensure no other high-bandwidth devices are competing for the same Thunderbolt bus. Update Thunderbolt drivers and firmware on your computer.

Use the LaCie Toolkit software or Disk Utility to check the RAID status. Reconfigure the RAID array if necessary, but be aware that reformatting will erase all data on the drives.

Ensure the memory card is properly inserted. Try a different memory card to rule out a faulty card. Make sure your operating system has the latest drivers and firmware for the drive.

Spinning hard drives can produce normal operating sounds. However, loud grinding or clicking noises may indicate a failing drive. If using RAID 0, back up your data immediately. If using RAID 1, one drive may be failing, and you can attempt to replace it.