Best current price£25.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£25.99Visit shop Sanheshun Red,Gold-1 Butane Propane Gas Kit, Multi Purpose Roofers Heating Brazing Torch Weed Blow Burner Plumbers Kit With 3 Nozzle, 3.2Cm, 4Cm & 5Cm + 2M Gas Hose
Visit shop2 offers from £25.99 - £34.55
View price history by clicking the chart icon.
This Sanheshun Butane Propane Gas Kit is designed for DIY enthusiasts, tradespeople, and homeowners seeking a versatile and reliable tool for various heating and soldering tasks. Its key benefit is the effortless adjustable swirl flame and quick dual-switch ignition, providing precise control and fast operation. A potential caveat is the need for compatible butane or propane fuel canisters, which are not included.
| Model Part Number | SHS00A00131 |
|---|---|
| Brand | Sanheshun |
The Sanheshun Gas Kit is compatible with both butane and propane fuel canisters. Please ensure you use standard, approved canisters.
Once the tool has cooled down, simply unscrew the currently attached nozzle tip. Then, screw on your desired nozzle (32mm, 40mm, or 50mm) until it is securely fastened.
Yes, the kit includes smaller nozzles (32mm and 40mm) that are suitable for more precise tasks like detailed soldering or brazing.
Yes, the heat-insulated handle is designed to prevent burns during extended use, enhancing safety and comfort.
You can adjust the flame size using the control dial located on the tool. Simply turn the dial to increase or decrease the flame intensity without needing to hold a trigger.
The product weighs approximately 1.6 pounds.
No, the fuel canisters (butane or propane) are not included with the kit and must be purchased separately.
Ensure the fuel canister is properly and tightly connected. Check the seal for damage and replace if necessary. Discontinue use if a leak persists.
Check the fuel level in the canister and replace if low. Ensure the nozzle is clean and free from obstructions. Adjust the flame control dial.
Ensure the dual-switch is pressed and turned correctly. Check if the fuel canister is properly connected and has sufficient fuel. Clean the ignition area if debris is present.
Allow the tool to cool completely. Carefully remove the nozzle and use a fine wire or pick to clear any blockages. Ensure the inside of the nozzle is clean before reattaching.
Setup:
Compatibility:
Care:
