Flex Power Tools Polisher - 1400W - 125mm

The maximum disc diameter compatible with the Flex Power Tools SE14-2 125 is 125mm.

The product information does not specify if a transformer is included. It requires a 110V power supply, so a transformer may be necessary depending on your local power outlet voltage.

The polisher features a VR electronic control system with stepless speed selection. You can adjust the speed using the integrated speed control mechanism, typically a dial or trigger, allowing you to set it between 600 and 2100 RPM.

This polisher is suitable for various surfaces including painted surfaces, wood, stone, and metal. It is ideal for sanding, refurbishing, renovating, and processing these materials.

The package typically includes the polisher, an adaptor, a handle, a face pin spanner, hexagon socket wrenches, cable clips, sanding paper, and an L-BOXX® carrying case with an insert.

Keep the tool clean, especially the ventilation slots, by regularly removing dust and debris. Ensure the power cord is in good condition. Proper storage in the provided case also helps protect the tool.

The product information provided does not specify the warranty period. Please refer to the manufacturer's documentation or contact the seller for detailed warranty information.

Check if the tool is properly plugged into a functional 110V outlet. Ensure the power switch is in the 'on' position. Verify the power source is active and the correct voltage is supplied. Check for any visible damage to the power cord.

Ensure the accessory is securely attached and appropriate for the task. Check if the tool's air vents are blocked with dust; clean them thoroughly. The VR electronic system may be reducing speed due to overload; reduce the applied pressure or switch to a coarser accessory if sanding. Check for motor overheating, allow it to cool down if necessary.

Ensure the accessory is correctly mounted and balanced. Check if the accessory itself is damaged or worn out. Verify that the tool holder is clean and free of debris.

Clean the ventilation slots. Reduce the working pressure and duration of continuous use. Ensure you are using the correct accessory for the material and task. Allow the tool to cool down between prolonged tasks.