Ecobat Milled Lead Flashing - Code 4 - 150mm x 3m

Code 4 refers to the thickness of the lead sheet, which is approximately 1.8mm. This thickness is suitable for medium-duty roofing applications, offering a good balance of durability and workability.

Patination oil is essential for protecting the lead surface from atmospheric elements, preventing the formation of white carbonate deposits, and ensuring the longevity and appearance of the leadwork. It should be applied after installation.

While primarily designed for pitched roofs and specific applications like valleys and flashings, lead can be used on flat roofs, but specific installation methods and thicknesses might be recommended based on the project's requirements and exposure.

The lead flashing can be cut using a sharp lead knife, tin snips, or specialized lead cutters. Ensure clean, straight cuts for proper fitting.

This Code 4 milled lead flashing is suitable for pitched roofs, especially for detailing work such as valleys, step flashing, and soakers. It's designed for light to medium roofing tasks. For very heavy-duty or specialized roofing, other codes or materials might be more appropriate.

One roll of Ecobat Milled Lead Flashing Code 4 measures 150mm wide by 3 meters long and weighs approximately 9kg.

Yes, lead is 100% recyclable and has a very long lifespan, making it a sustainable building material when sourced and installed responsibly.

Ensure the lead has been allowed to acclimatize to ambient temperature; cold lead can be stiffer. Gentle warming may help, but avoid overheating. Verify you are using Code 4, which offers good malleability.

This is likely lead carbonate, a natural reaction to atmospheric moisture and CO2. Apply a coat of patination oil to seal the surface and prevent further formation. Ensure proper ventilation if the lead is in an enclosed space.

Re-inspect the installation for any gaps, incorrect overlaps, or inadequate dressing of the lead. Ensure the lead channels water effectively away from the vulnerable area. Check for any damage to the lead or surrounding materials.

This can occur before patination oil is applied. Ensure adequate runoff away from porous materials. Once the patination oil is applied and cured, this staining should be minimized.