SRAM X-Sync Direct Mount Chain Ring - 46T - Black

You will need a torque wrench, a chain whip, and possibly a crank puller depending on your crankset.

Replace the chainring when the teeth are worn or damaged, typically after several thousand miles of use. Inspect regularly.

This chainring is designed to work with 11 and 12-speed chains. Make sure your chain is compatible with the chainring and the rest of your drivetrain.

This specific chainring is a 46T. Other sizes, such as 40T and 42T, are available in the SRAM X-Sync Direct Mount line, but are sold separately. Please ensure compatibility with your existing drivetrain.

Use a degreaser and a clean cloth to remove dirt and grime. Avoid abrasive cleaners that could damage the finish.

Warranty information is dependent on your place of purchase and the SRAM warranty guidelines, please check SRAM's website for specific warranty information.

Ensure the chainring bolts are properly tightened. Check for chain wear and replace if necessary. Verify front derailleur alignment and adjustment.

Check front derailleur alignment and limit screws. Adjust cable tension.

Use a torque wrench to ensure proper bolt tightness. Apply thread locker if necessary.