Best current price£3.50from eBay
Shopping.co.uk recommended and popular offers
eBay£3.50Visit shop Split Die Nut M12 x 1.50 (from set 4554) Connect 37050
Visit shop
Amazon£8.55Visit shop Connect Silver 37040 Die Nut M10 X 1.0 From 4554
Visit shop21 offers from £3.50 - £12.07
View price history by clicking the chart icon.
This guide is for mechanics, DIY enthusiasts, and anyone dealing with damaged or worn threads. The Connect Die Nut M16 x 1.5 (37057) offers a precise solution for repairing and cleaning M16 x 1.5 threads, providing a cost-effective alternative to replacing entire components. A key benefit is its split-nut design for easy application. However, it is specifically designed for M16 x 1.5 threads and may not be suitable for other sizes without the appropriate die nut.
| Model Part Number | 37057 |
|---|---|
| Brand | Connect |
This die nut is specifically designed for M16 x 1.5 threads, meaning a nominal diameter of 16mm and a pitch of 1.5mm.
No, this is a 'die nut' designed to repair or clean internal threads. For external threads, you would need a die holder with a corresponding die.
The split feature allows you to open the die nut slightly by loosening its screw. This enables you to place it directly onto the damaged thread section without needing to thread it on from the end.
A regular die is typically used in a die stock to cut new threads from a blank rod. A die nut is designed to repair or clean existing threads on a bolt or stud, and its split design allows for easier application.
While it can re-form damaged threads, it is primarily intended for repairing or cleaning existing threads, not for cutting entirely new threads from a smooth rod.
The product information does not specify the exact material, but it is constructed from durable materials suitable for thread repair applications.
Apply firm, consistent pressure. Avoid excessive force that could cause further damage to the thread or the die nut itself. It's often best to back the die nut off slightly periodically to clear metal shavings and allow for lubrication.
Ensure you are using the correct M16 x 1.5 die nut. Check that the damaged section of the thread is not excessively deformed. Apply a penetrating lubricant to the thread. If the thread is severely damaged, try cleaning it first with a wire brush.
Verify that the die nut is tightened sufficiently to engage the threads. Ensure you are turning the die nut in the correct direction (typically clockwise to cut or re-form threads). Make sure the die nut is clean and free of obstructions.
Carefully position the die nut onto the thread. The split design should allow for initial alignment. Ensure the die nut is perpendicular to the thread axis before applying turning force.
Setup: The Connect Die Nut M16 x 1.5 does not require complex setup. Its split design allows it to be opened by loosening the retaining screw(s). Once opened, it can be placed over the M16 x 1.5 thread needing repair or cleaning. A suitable wrench or tap handle should be used to grip the external hex or drive feature of the die nut to apply rotational force.
Compatibility: This die nut is specifically designed for threads conforming to the M16 x 1.5 standard (16mm nominal diameter with a 1.5mm pitch). It is not compatible with other metric thread sizes (e.g., M14, M12) or imperial threads.
Care: After use, clean the die nut to remove any metal filings or debris. A wire brush can be used for stubborn residue. Apply a light coating of oil to prevent rust and store it in a dry environment. Inspect for any signs of excessive wear or damage before the next use.
