Kitchen Kit Filler Panel - Alby Blue

The primary purpose is to fill installation gaps between kitchen cabinets or at the end of a cabinet run, creating a seamless and professional finish.

The panel is constructed from 18mm MDF with a durable PET foil finish and matching 1mm ABS edging.

This panel is specifically colour-matched to the Kitchen Kit Shaker Matt Alby Blue range. It may not provide an exact match for other colours or brands.

Yes, the panel can be cut to a more precise length using a fine-toothed saw. Ensure cuts are clean and neat.

Clean with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the foil.

The panel measures 715mm in height and 146mm in width.

It is typically attached to the adjacent cabinet using screws or suitable fixing brackets, ensuring it sits flush with the cabinet face.

Check if the adjacent cabinets are installed plumb and level. Ensure no obstructions are behind the gap. Trim the panel if it's slightly too long for the space.

Minor scratches can sometimes be gently buffed out. For deeper scratches, consider touch-up paint if available for the Alby Blue finish, or replace the panel.

Apply a small amount of strong PVA wood glue or a suitable adhesive to the edge and press firmly back into place using clamps or weights while drying. Ensure the surface is clean before application.

Use a sharp, fine-toothed saw (e.g., a panel saw or jigsaw with a fine blade). Support the panel firmly and cut slowly to prevent chipping or splintering.