Copper Tap Tails - M10 x 15mm

You may need a pipe cutter, wrenches, and the appropriate fittings for your preferred connection method (soldered, compression, or push-fit).

Yes, these copper tap tails are suitable for both hot and cold water applications.

These tap tails are designed to fit taps with M10 x 15mm fittings. Please ensure compatibility before installation.

Use a pipe cutter to ensure a clean, straight cut. Measure carefully to ensure the correct length.

First, turn off the water supply. Then, tighten the connections. If the leak persists, replace the tap tails or consult a plumber.

It is recommended to inspect the tap tails every few months for any signs of corrosion or leaks.

With proper installation and care, these copper tap tails are designed for long-term use.

Tighten the connections. If the leak persists, check the seals and replace the tap tails if necessary.

Ensure that the tap tails are not kinked or blocked. Check for any obstructions in the pipes.

Make sure you have the correct fittings and that the tails are cut to the right size. If needed, consult a professional plumber.