Amtech Cold Chisel - 18" x 3/4" - G2900

The Amtech Cold Chisel is designed for cutting masonry, brick, and concrete.

Use a file or grinder to sharpen the blade, maintaining the original bevel angle. Ensure you wear appropriate eye protection.

Always wear safety glasses and gloves. Ensure the work area is clear of obstructions. Consider using a face shield for additional protection.

Store the chisel in a dry place, such as a tool bag or rack. Clean it after each use and apply a light coat of oil to prevent rust.

The chisel measures 18 inches by 3/4 inches (450mm x 19mm).

The rubber guard provides additional safety by protecting your hand from impact and reducing vibration.

Inspect the chisel for cracks, chips, or deformation. Replace it if any significant damage is found.

No, the Amtech Cold Chisel is specifically designed for masonry, brick, and concrete. Using it on metal will likely damage the blade.

Sharpen the blade using a file or grinder. Ensure the correct sharpening angle is maintained. Use appropriate cutting techniques.

Reduce the force of the hammer blows and ensure the chisel is aligned correctly. Inspect the material being cut for hidden obstructions. Consider replacing the chisel if the damage is severe.

Ensure the chisel is sharp and that you are using sufficient force with the hammer. Try angling the chisel slightly to improve cutting action.