Best current price£20.36from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£20.36Visit shop Polypipe - 110mm Short Radius Bend - Single Socket - 87.5 Degree - Terracotta
Visit shop1 offer from £20.36
View price history by clicking the chart icon.
This guide is for plumbers, builders, and DIY enthusiasts working on underground drainage systems. The Polypipe 110mm Short Radius Bend offers precise directional control with a quick push-fit installation, simplifying complex runs. A potential consideration is ensuring the push-fit joint is fully engaged for optimal sealing. This durable PVCu bend facilitates efficient changes in direction for gravity drainage and sewerage in residential, commercial, and civil projects.
| Model Part Number | UG489 |
|---|---|
| Brand | Polypipe |
This bend has an angle of 87.5 degrees.
No, this bend is designed specifically for gravity drainage and sewerage applications.
The bend is made from durable PVCu (Unplasticised Polyvinyl Chloride).
The joint is secured using a push-fit system with an integrated seal and a snap-cap mechanism.
No, this is a push-fit product and does not require solvent cement for installation.
It is manufactured in the UK to BS EN 1401 and BS4660:2000 standards.
The terracotta finish is designed to help the fitting blend in with traditional clay drainage systems.
Ensure the pipe end is clean, free of burrs, and slightly chamfered. Lubricant suitable for drainage seals can be applied to the seal if necessary. Confirm both components are 110mm diameter.
The pipe may not have been fully inserted. Disconnect and re-seat the pipe firmly into the socket until fully engaged. Check the integrity of the seal for damage.
Ensure the pipe has been pushed in fully past the retaining ribs within the socket. The snap-cap system ensures a secure fit once properly engaged.
Setup: Ensure the ends of both the pipe and the socket are clean and free from debris. Lightly chamfer the spigot end of the pipe to ease insertion. Push the pipe firmly into the socket until it is fully seated against the internal stop. The integrated seal provides a watertight connection.
Compatibility: This 110mm bend is compatible with standard 110mm underground drainage pipes and fittings manufactured to BS EN 1401 and BS4660:2000 standards. It is suitable for use in gravity drainage and sewerage systems.
Care: As this is an underground component, minimal ongoing care is required. Periodically check for any surface damage during inspections. Ensure surrounding ground stability to prevent undue stress on the joint.
Polypipe Underground Drain - 110mm Long Radius Bend - UG412From £17
OsmaDrain Double Socket Long Radius Bend - 87.5° - 110mmFrom £25
Pegler Yorkshire Tectite Push-Fit 90° Pipe Elbow - 15mmFrom £3
FloPlast Drainage Rest Bend - 87.5 Degree x 110mmFrom £18
Downpipe Bend - Brown - 68mmFrom £5
FloPlast Underground Drainage Access Bend - 110mmFrom £23
Plumbsure Brass Compression Equal Tee - 22mm X 22mm X 22mmFrom £8
FloPlast Round Downpipe Bend - 112.5 Degree - 68mm - BrownFrom £4
FloPlast Round Downpipe Offset Bend - 112.5 Degree x 68mm Anthracite GreyFrom £4
Osma Drainage Equal Junction 87 Degree Double Socket 110mmFrom £32
OsmaDrain Adjustable Bend - 110mm Double Socket 0-30°From £32
End Feed 90° Equal Elbow 15mm - Plumbright - 78445From £1