Best current price£166.00from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£166.00Visit shop Clarke 7230602 Csv2a 110V 11/4 Submersible Vortex Water Pump
Visit shop
B&Q£172.42Visit shop B&Q - Clarke Csv2A 620W Submersible Vortex Water Pump With Float Switch (110V)
Visit shop4 offers from £166.00 - £180.00
View price history by clicking the chart icon.
The Clarke Contractor CSV2A is a powerful 110V submersible vortex water pump designed for demanding site and trade applications, capable of efficiently draining flooded areas, excavations, and water tanks. Its key benefit lies in its heavy-duty vortex impeller, which can handle solids up to 30mm, and an automatic float switch for unattended operation. A potential caveat is its 110V rating, requiring a transformer for safe site use. This guide covers its features, performance, setup, and maintenance to ensure effective operation.
| Model Part Number | 7230602 |
|---|---|
| Brand | Clarke International |
The Clarke Contractor CSV2A can pass solids up to 30mm in diameter.
The pump is rated for 110V and is intended for site use, typically requiring connection to a site transformer. The specific cable and plug details should be verified with the product packaging or manufacturer.
This pump is designed for clean and dirty water with solids. It is not recommended for sewage, septic waste, or highly corrosive liquids.
Ensure the pump is placed on a stable surface and the float switch has enough clearance to move up and down freely with the water level. Avoid placing the pump in locations where the float switch can get tangled or obstructed.
After each use, rinse the pump with clean water. Periodically check and clean the inlet and impeller for debris. Store in a dry location.
The pump has a maximum head (lift height) of 8 meters, which indicates the maximum vertical distance it can push water. The submersible depth itself is limited by the length of its power cable and discharge hose.
Yes, the automatic float switch allows for unattended operation. It will start when the water rises and stop when it falls to a set level.
Check the 110V power connection to the transformer and the pump. Ensure the float switch is not held in the 'off' position. Verify the water level is sufficient to activate the float switch.
Inspect the inlet screen and impeller for blockages (debris, hair, etc.). Clean any obstructions. Check the discharge hose for kinks or blockages. Ensure the maximum head height is not exceeded.
This may indicate the water level is too low, or the float switch is obstructed. Ensure the pump is adequately submerged and the float switch can move freely.
Check for air leaks in the discharge hose connection. Ensure the pump is fully submerged and the inlet is not blocked. Verify the impeller is not damaged.
Setup:
Compatibility:
Care:
