Osma SquareLine Offset Bend Socket 61mm Black - 4T825B

This Osma SquareLine offset bend socket provides a 67.5° angle to redirect the downpipe.

This offset bend socket is designed for use with Osma 61mm square downpipes.

No, this product is part of the SquareLine system and is only compatible with 61mm square downpipes.

A watertight seal is achieved through the integrated Flexiclip seal jointing mechanism, which provides a secure and leak-resistant connection when components are properly fitted.

One downpipe in the Osma SquareLine system, utilizing components like this offset bend, is suitable for a maximum roof area of 178m².

Yes, this offset bend socket is designed to function effectively as either a top bend (connecting to the gutter outlet) or a bottom bend (part of the lower downpipe run).

The Osma SquareLine system, including this offset bend, is available in black, white, and brown.

Ensure the Flexiclip mechanism is fully engaged on both ends of the offset bend. Check for debris on the connecting ends and re-seat the component. If the seal appears damaged, replace the component.

Ensure all connecting ends are clean and free from obstructions. A small amount of silicone lubricant specifically designed for uPVC rainwater systems may aid in connection. Do not force components together.

Check the entire downpipe system, including the offset bend, for blockages from leaves or debris. Ensure all connections are correctly aligned and not restricting flow.