Setup, Compatibility & Care
Compatibility:
Before purchasing, verify that the Mann W724/1 is listed as compatible with your specific vehicle make, model, year, and engine type. Check the vehicle's owner's manual or consult with a parts specialist. Cross-reference numbers like ACDelco X 113 and Bosch 0 451 103 092 can also aid in confirming compatibility.
**Setup (Installation):
- Ensure the engine is cool.
- Safely raise the vehicle and locate the oil filter.
- Using an oil filter wrench, unscrew the old filter.
- Clean the filter mounting surface on the engine block.
- Lightly lubricate the rubber gasket on the new Mann W724/1 filter with clean engine oil.
- Screw the new filter on by hand until the gasket contacts the mounting surface, then tighten an additional 3/4 to 1 full turn (refer to vehicle service manual for exact torque).
- Lower the vehicle and refill the engine with the correct type and amount of oil.
- Start the engine and check for leaks around the filter.
Care:
Oil filters are designed for single use and should be replaced according to the vehicle manufacturer's recommended service interval, typically every 5,000 to 10,000 miles or as specified in the owner's manual. Failure to replace the filter can lead to reduced engine performance and potential damage.