Best current price£30.67from eBay
Shopping.co.uk recommended and popular offers
eBay£30.67Visit shop Micro Gas Adjustable Soldering Iron Terminal Set Butane Powered Electronics 8pc
Visit shop1 offer from £30.67
View price history by clicking the chart icon.
The AB Tools BPT331 Micro Gas Adjustable Soldering Iron Terminal Set is designed for professionals and hobbyists working in electronics, model engineering, industrial settings, and general household repairs, offering cordless convenience for tasks where power outlets are unavailable. Its key benefit is its portability and versatility, allowing for precise work in tight spaces with adjustable heat and multiple tip options. A potential caveat is its reliance on butane fuel, requiring refills and careful handling. This 8-piece set includes a refillable butane-powered soldering iron with manual ignition, an adjustable gas supply, and four distinct soldering tips.
| Model Part Number | BPT331 |
|---|---|
| Brand | AB Tools |
Turn the tool upside down, ensure it is cool, and press a standard butane lighter refill can nozzle firmly into the refill valve at the base. Hold for a few seconds until full, then let excess gas dissipate.
Use standard butane lighter refills, often labeled as "triple refined" or "premium" for best results and to minimize impurities.
Usage duration varies significantly based on the gas setting and continuous use. For intermittent tasks, a refill can last for several hours of total operation.
Yes, but always ensure the area is very well-ventilated due to the combustion of butane, which produces fumes. Avoid use in small, enclosed spaces without adequate airflow.
Ensure the tool is completely cool. Unscrew the tip retaining collar, remove the old tip, insert the new tip, and securely re-tighten the collar. Be careful not to overtighten.
The tool provides adjustable heat, with typical temperatures reaching up to approximately 950°F (510°C) when set to maximum.
Yes, the narrow design and adjustable heat make it suitable for delicate electronics, especially in hard-to-reach areas. However, for very fine pitch work, an electric iron with precise temperature control might be preferred.
Ensure the butane tank is filled. Check that the gas adjustment knob is partially open. Verify the external ignition source is functional and applied correctly near the tip.
Refill the butane tank. Check for blockages in the gas nozzle or tip. Adjust the gas flow using the adjustment knob.
Ensure the gas is flowing and the flame is correctly heating the tip. Clean the soldering tip with a damp sponge while warm. Check if the correct tip is attached for the task.
Ensure the refill can is properly seated during filling. If leakage persists, discontinue use and inspect the valve for damage or debris.
Immediately turn off the gas supply and allow the tool to cool. Do not use if overheating persists. Ensure the gas adjustment is not set too high for extended periods.
Setup:
Compatibility:
Care:
