Sony ECM-S1 Streaming Microphone - Wireless

Connect the receiver to your computer via the USB Type-C port. Your computer should recognize the ECM-S1 as an audio input device. Make sure to select it as the input in your recording software.

The wireless range is up to 150 meters, provided there's a good line of sight and minimal interference.

Yes, the ECM-S1 comes with a carrying case to protect it during transport and storage.

Yes, you can connect the receiver to your smartphone using either the 3.5mm audio cable or via Bluetooth.

The microphone can provide up to 13 hours of continuous use on a full charge.

You can monitor audio using headphones (sold separately) connected to the headphone output jack on the receiver or your recording device. Audio can be monitored via a USB connection.

Use a soft, dry cloth to clean the microphone and receiver. Avoid using liquids or abrasive cleaners.

Please refer to the product documentation or contact Sony support for warranty information.

Ensure the microphone and receiver are paired. Check that Bluetooth is enabled on your device. Ensure the devices are within the 150m range and there are no obstructions.

Check the connection between the microphone, receiver, and your recording device. Verify the volume levels on the microphone and your recording device. Ensure the correct input is selected on the recording device.

Adjust the microphone's position to reduce background noise. Use the built-in noise cut and low cut filters. Ensure the pop filter is correctly positioned.

Ensure the microphone is fully charged before use. Reduce the usage of high-power features if possible. Check for any devices connected that may be drawing extra power.

Reduce input gain using the dial on the microphone or reduce recording input on your device. Make sure you are not speaking too close to the microphone.