Ryobi Combi Drill & Jigsaw Starter Kit - R18Pdjs-220S

This kit is part of the Ryobi 18V ONE+™ system and uses Ryobi 18V ONE+™ batteries. Batteries and chargers are often sold separately unless specified in the kit contents.

This is an entry-level combi drill designed for most DIY and crafting tasks. For heavy-duty or continuous professional use, a higher-spec drill may be more suitable.

With the battery removed, locate the blade clamp mechanism on the jigsaw. Open the clamp, insert the T-shank blade fully, and release the clamp to secure it. Ensure the blade is correctly seated before use.

The 4-stage pendulum action allows you to adjust the blade's orbital movement. Lower settings provide cleaner, more precise cuts for detailed work, while higher settings offer more aggressive, faster cuts for rougher applications.

Yes, this kit is specifically mentioned as being great for beginners due to its user-friendly design and versatility for common DIY tasks.

The combi drill has a maximum torque of 50Nm.

Ensure the battery is fully charged and correctly inserted into the tool. Check if the battery contacts are clean.

Adjust the 4-stage pendulum action to a lower setting for finer cuts. Ensure the correct blade for the material is used and the blade is not dull. Apply steady pressure and guide the tool smoothly.

Ensure the chuck is tightened securely around the bit. Check that the bit shank is clean and properly seated within the chuck jaws.

Allow the tool to cool down. Ensure ventilation slots are clear of debris. Reduce the load on the tool and avoid continuous heavy use beyond its intended capacity.