Best current price£7.16from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.16Visit shop B&Q - Cat6A Panel Mount Ftp Inline Punch Down Coupler Joiner Ethernet 8P8C Cable Metal
Visit shop1 offer from £7.16
View price history by clicking the chart icon.
This kenable Cat6A FTP Tool-less Connector is for network installers and IT professionals seeking a quick and reliable way to extend or repair shielded Cat6A Ethernet cables. Its key benefit is the tool-less termination, which significantly speeds up installation and reduces the need for specialized tools. A potential caveat is its specific design for solid core cables, meaning it's not suitable for stranded patch cables.
| Series | Cat6A |
|---|---|
| Model Part Number | P284T |
| Brand | kenable |
No, this tool-less connector is specifically designed for solid core Ethernet cables only. Using stranded cables will not result in a proper or reliable connection.
FTP stands for Foiled Twisted Pair, meaning the cable has a metallic foil shield around the twisted pairs. UTP (Unshielded Twisted Pair) does not. This connector is designed to work with the shielding of FTP cables to maintain signal integrity and reduce interference, which is crucial for high-speed networks like Cat6A.
No, the primary feature of this connector is its 'tool-less' design. You do not need crimping tools. However, you will need basic tools like a cable stripper to prepare the cable ends.
You should use the same standard on both ends of the connection. The connector is clearly marked with both T-568A and T-568B color codes, allowing you to choose whichever is appropriate for your network installation.
The connector has a frame or tab designed to fit into standard patch panel cutouts or wall plates, allowing it to be securely fixed in place rather than just existing as an inline joint.
This connector is rated for Cat6A, supporting speeds of up to 10 Gbps and a bandwidth of 500 MHz, ensuring compatibility with modern high-performance networks.
Verify that both cables were properly prepared and inserted into the correct slots according to the T-568A/B standard. Ensure the connector hood is fully closed and latched. Test the individual cable runs without the coupler to isolate the issue.
Check for correct wire alignment and ensure all conductors are making good contact. Confirm that the cable is indeed shielded (FTP) and that the connector's shielding is properly engaged. Electromagnetic interference in the area may also be a factor; consider relocating the cable run if possible.
Ensure no wires are out of place or obstructing the closure. Make sure the cable jacket is not caught or preventing the hood from seating correctly. Gently re-align the wires and try closing the hood again.
Setup:
Compatibility:
Care:
