JCP Fixings Anchors Hexagon Bolt - 15mm/M10 x 116

The BZP (Bright Zinc Plated) finish provides a layer of protection against corrosion and rust, extending the lifespan of the anchor, especially in environments exposed to moisture.

This heavy-duty anchor is designed for use in solid, dense materials such as concrete, brick, and natural stone. It is not recommended for hollow materials like drywall or hollow-block.

Refer to the product's technical specifications or packaging for the recommended drill bit size. Using the incorrect size can compromise the anchor's holding power.

Yes, the BZP finish offers good resistance to outdoor elements. However, for prolonged exposure in highly aggressive or coastal environments, additional protective measures might be considered for long-term integrity.

CE marking indicates that the product meets the European Union's essential health, safety, and environmental protection standards. For anchors, this often relates to load-bearing capabilities and safety assurance.

While designed for heavy loads, specific seismic ratings depend on detailed testing. Always consult the product's technical data sheet or manufacturer for suitability in seismic zones.

You will need a drill with an appropriate masonry bit for creating the hole, a cleaning tool (like a brush or vacuum) for debris, and a wrench or socket set to tighten the hexagon bolt.

Ensure the hole was drilled to the correct diameter and depth. Verify the substrate is solid and suitable for heavy-duty anchors. Check that the anchor was fully engaged and tightened properly.

Use the correct size wrench for the hexagon head. Ensure the bolt threads are clean and free from obstruction. If the bolt spins freely, the hole may be too large or the substrate may be crumbling.

While BZP offers protection, extreme conditions can lead to surface rust. For critical applications, consider protective coatings or replacement if corrosion is significant and compromises integrity. Clean with a soft cloth.