Irwin Mortar Rake Starter Kit

The kit is primarily used for the fast and efficient removal of mortar joints in brickwork for repointing, and for chasing out channels in walls for the installation of cables, pipes, or switchboxes.

Yes, this is an accessory that requires a compatible angle grinder to operate. The kit includes adaptors and a sole plate to fit most common angle grinders.

The sole plate is adjustable for variable clearance depths. Refer to the product manual for specific instructions on adjusting the sole plate mechanism.

The mortar rake is designed to be less intrusive than demolition chisels or standard grinding discs, helping to minimize damage to surrounding brickwork. However, always exercise caution and use appropriate safety gear. Test on an inconspicuous area first if unsure.

After ensuring the angle grinder is disconnected from power, clean the carbide tips and sole plate with a brush or damp cloth to remove any mortar residue or dust.

The kit includes three aluminum reduction rings (41mm, 42.5mm, and 43mm) to ensure compatibility with the most popular angle grinders on the market.

Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and dust masks. Read the instruction manual carefully before use and ensure the area is well-ventilated.

Ensure the carbide tips are sharp and not excessively worn. Check that the correct depth setting is applied and that the angle grinder has sufficient power for the task. Ensure the attachment is securely fastened.

Verify that the mortar rake and sole plate are correctly and securely mounted to the angle grinder. Check that the angle grinder itself is in good working order. Ensure reduction rings are properly seated.

Re-adjust the sole plate settings. Ensure the sole plate is moving freely and not obstructed by debris. Check that the angle grinder is held steadily against the surface.

Confirm you are using the correct size reduction ring for your angle grinder's flange. Check the diameter of your angle grinder's spindle flange and compare it to the dimensions of the included rings.