Roland Microphone Cable - Black Series

This cable is designed for professional audio applications, providing a reliable connection between instruments or microphones and audio equipment, ensuring accurate sound reproduction and minimizing noise.

It features a 1/4-inch (6.35mm) straight male connector on one end and an XLR straight female connector on the other.

The cable is 6 meters (approximately 20 feet) in length.

Yes, it is suitable for condenser microphones as it provides an XLR connection which is standard for microphone inputs, including those that supply phantom power.

This cable is not ideal for a direct guitar-to-amplifier connection as most amplifiers expect a 1/4-inch input. However, it can be used if your amplifier or audio interface has an XLR input designed for instrument-level signals or if you are using a DI box.

Low capacitance in an audio cable means it has less resistance to high frequencies. This helps preserve the clarity and detail of the original sound, especially for instruments with a wide frequency range.

Avoid sharp bends, store it loosely coiled, and keep connectors clean and dry. Handle by the connector body when plugging and unplugging.

Ensure both ends of the cable are securely plugged into the correct input and output ports. Test the cable with different devices to rule out a fault with the source or destination equipment.

Check that the cable is fully seated. Ensure that any connected equipment is properly grounded. Try a different cable to see if the issue persists, indicating a potential ground loop or interference problem.

Inspect the connectors for any debris or damage. Gently flex the cable near the connectors to check for loose internal connections. If the problem continues, the cable may need replacement.