Best current price£8.00from Amazon
Shopping.co.uk recommended and popular offers
Amazon£8.00Visit shop Briwax Original Silver Grey 400g - Multi-Shade Wood Wax Polish | Ideal for Furniture Restoration & DIY Wood Projects
Visit shop
eBay£14.30Visit shop Briwax Wax Polish Dark Oak 200G - BWDO200
Visit shop
The Range£20.70Visit shop Briwax Wax Polish Antique Brown 400G - Beeswax, Carnauba - Bw0502101221 - Satin Oak
Visit shop110 offers from £8.00 - £99.10
View price history by clicking the chart icon.
The Briwax Wax Polish in Rustic Pine is designed for homeowners and DIY enthusiasts looking to protect, clean, and enhance wooden furniture, as well as other surfaces like leather, metal, and painted finishes. Its key benefit is providing a smooth, lasting finish that revives natural grain and color with minimal effort. A potential caveat is that consistent results depend on proper surface preparation and application technique.
| Model Part Number | BWRP200 |
|---|---|
| Brand | Briwax |
The frequency depends on the usage and exposure of the surface. For high-traffic furniture, reapplication every 6-12 months is often recommended. For decorative items, it may last much longer.
Yes, Briwax can be applied over existing varnish or paint to add protection and enhance sheen. Ensure the surface is clean and dry, and test in an inconspicuous area first.
Briwax, particularly the Rustic Pine shade, can slightly deepen and enrich the natural color of the wood, highlighting its grain. It does not typically add a heavy color tint but rather enhances the existing tones.
Briwax is primarily designed for interior use. It offers protection against dust and light wear but is not formulated to withstand prolonged exposure to moisture, UV rays, or extreme weather conditions.
Briwax can be removed using a solvent such as white spirit or mineral spirits on a clean cloth. Wipe the surface down to dissolve and lift the wax, then clean with a tack cloth before applying a new finish.
Briwax is known for its blend of natural beeswax and other waxes, providing a good balance of protection, shine, and ease of application. Its formulation is designed to penetrate and condition surfaces, offering a durable, traditional finish.
This can happen if too much wax was applied or if it was not buffed sufficiently. Apply a small amount of solvent (like white spirit) to a clean cloth and wipe the affected area to remove excess wax, then reapply a thinner coat and buff thoroughly.
The wax may not have fully dried or cured. Ensure the room has good ventilation and allow more time for the wax to dry. If it persists, try buffing again vigorously with a clean, dry cloth. In extreme cases, a light application of solvent may be needed.
This could be due to insufficient buffing or applying the wax too thickly. Use a clean, soft cloth and buff with more pressure and speed. For very dull surfaces, a second thin coat may be needed after the first has been buffed.
The wax may have become very cold. Gently warm the tin (e.g., by placing it in warm water or a warm room) before attempting to apply. Avoid direct heat which can melt the wax.
Setup: Ensure the surface to be treated is clean, dry, and free from old wax, grease, or polish. For best results, lightly sand any rough areas and remove dust.
Compatibility: Briwax is suitable for bare wood, previously waxed wood, sealed wood, metal, leather, and painted surfaces. It is not recommended for use on surfaces that will be in direct contact with food without an additional food-safe sealant. Always test in an inconspicuous area first, especially on delicate or antique items.
Care: Apply a small amount of polish with a soft cloth, spreading evenly. Allow to dry for a few minutes until a slight haze appears. Buff vigorously with a clean, soft cloth to achieve a deep sheen. For heavily worn surfaces, multiple thin coats may be beneficial, allowing each coat to dry and be buffed before applying the next. Store tins in a cool, dry place away from direct sunlight.
