Draper Impact Drill - 710W

The maximum drilling capacity for wood is 25mm.

Yes, by using appropriate screwdriver bits and the variable speed control in rotary mode. Start at a lower speed to avoid stripping screw heads.

There is a selector switch typically located near the base of the drill or the motor housing. Ensure the drill is off and unplugged before switching modes.

For concrete, you should use masonry drill bits specifically designed for hammer drills. The maximum capacity for concrete is 13mm.

Yes, this model features a 13mm keyless chuck for quick and easy bit changes without the need for a separate key.

This is a corded electric drill that operates on a 230V power supply.

Use the included depth gauge. Set it to your desired depth before you begin drilling, ensuring it is locked in place.

Check that the power cord is securely plugged into a working outlet. Ensure the trigger switch is functioning correctly.

Ensure the keyless chuck is tightened fully around the bit shank. Check the chuck jaws for debris and clean if necessary.

Verify that the mode selector is correctly set to the hammer position. Ensure you are applying adequate pressure for the hammer mechanism to engage.

Reduce the drilling load, ensure ventilation slots are clear, and allow the drill to cool down between extended periods of heavy use.

Check that the drill bit is securely seated and straight. Ensure the auxiliary handle and depth gauge are properly attached. For hammer mode, some vibration is normal.