kenable DC Power Extension Cable - 1.5m - White

This cable features a 2.1mm socket for the female end and a corresponding male plug. It is designed to mate with DC power barrels that have a 2.1mm inner pin.

This cable is primarily intended for low wattage appliances (up to 60 watts) and is most commonly used for CCTV equipment. While it might work for other devices, you must ensure the connector size (2.1mm socket) and power rating (max 60W) are compatible with your specific device.

You should check the specifications provided by the manufacturer of your device or the original power adapter. Look for information regarding the DC input jack size. Often, devices designed for CCTV systems use a 2.1mm or 2.5mm inner pin within a 5.5mm outer barrel.

The kenable DC Power Extension Cable is rated for a maximum of 60 watts (or 60VA).

This cable is designed for indoor use. It is not rated for outdoor weather exposure and should be kept in a dry environment.

Moulded ends refer to the connectors being permanently formed as part of the cable's insulation. This provides a more robust and secure connection compared to non-moulded or crimped connectors, reducing the risk of failure.

The cable has a single (coax type) 3mm Outer Diameter (OD).

Double-check that all connections are secure. Verify that the original power adapter is functioning correctly and that the device's power requirements do not exceed the cable's 60W limit. Confirm that the 2.1mm socket size is correct for both the existing power cable and the device.

Inspect the cable and connectors for any signs of damage. Ensure the connectors are clean and properly seated. Try using a different power adapter or testing the cable with another compatible device to isolate the issue.

A slight warmth may be normal for passively powered cables, but significant heat indicates the device may be drawing more power than the cable can safely handle (over 60W). Disconnect immediately and verify the power draw of your device. Consider a higher-rated cable if necessary.