320mm SPRING LOADED SLATE CUTTER - Tooltime
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Tooltime 320mm Spring Loaded Slate Cutter to work with natural slate. This cutter's spring-loaded handles and hardened steel construction make cutting and trimming slate easier and more efficient. Note that it's designed specifically for slate up to 6mm thick.
All features
| Model Part Number | RF008-TT |
|---|---|
| Brand | tooltime |
Extended Product Information
FAQs
What is the maximum thickness of slate this cutter can handle?
The cutter can handle slate up to 6mm thick.
How do I store the slate cutter safely?
Engage the locking mechanism and store the cutter in a dry place.
What materials can I cut with this cutter?
This cutter is designed specifically for natural slate.
How do I maintain the cutter to prevent rust?
Clean the cutter after each use and apply a light coat of oil to the cutting edges periodically.
Are replacement blades available?
Contact the manufacturer or retailer for information on replacement blades.
Troubleshooting
Cutter is difficult to operate.
Ensure the handles are clean and free of debris. Check for any obstructions in the mechanism.
Cuts are not clean.
Make sure the slate is positioned correctly and the cutter blades are sharp. If needed, sharpen or replace the blades.
Pros and Cons
Pros
- Easy to use due to spring-loaded handles.
- Durable construction for extended lifespan.
- Safe storage with the locking mechanism.
Cons
- Limited to cutting slate up to 6mm thick.
- Requires proper maintenance to prevent rust.
Setup, Compatibility & Care
Setup
No special setup is required. The cutter is ready to use upon arrival. Ensure the locking mechanism is disengaged before use.
Compatibility
The Tooltime 320mm Spring Loaded Slate Cutter is designed for use with natural slate. It is not suitable for cutting other materials.
Care
- After use, clean the cutter to remove any slate debris.
- Wipe the cutter with a dry cloth after use.
- Store the cutter in a dry place. Consider applying a light coat of oil to the cutting edges periodically to prevent rust.