Sealey Chisel - 30 x 375mm

This chisel is designed for use with specific Bosch and Makita rotary hammer models that are equipped for chiseling or demolition work.

The chisel has a width of 30mm and a length of 375mm.

No, it is only compatible with a specific list of Bosch and Makita rotary hammer models. Always check your tool's compatibility.

Clean the chisel with a stiff brush or a damp cloth to remove dust and debris. Lightly oil the shank periodically to prevent rust.

It is best suited for breaking up hard materials such as concrete, masonry, and removing stubborn tiles.

Keep the chisel clean, lightly oiled, and stored in a dry place. Inspect it regularly for damage and replace it if any significant wear or cracks are present.

The longer length provides better reach and can help reduce the need to bend over excessively during use, improving user comfort during prolonged demolition tasks.

Verify that your rotary hammer is one of the specified compatible models. Ensure the chisel shank is clean and free of debris. Check if the tool holder is damaged or obstructed.

Ensure the chisel is properly seated and locked in the tool. Check that the rotary hammer is set to the correct chipping/demolition mode. Inspect the chisel tip for wear or damage; sharpen or replace if necessary. Clear debris from the work area.

Withdraw the tool carefully by rocking it slightly. Avoid forcing the chisel excessively, as this can damage the chisel or the tool. Ensure you are working at an appropriate angle.

This can be normal for demolition tasks. However, if abnormal, check that the chisel is securely locked and that the tool itself is in good working order. Wear appropriate personal protective equipment (PPE).