Lumberjack Tools Grease Gun - 20V XPSERIES

This grease gun is compatible with standard 14.5 oz grease cartridges. It can also be filled with bulk grease. Refer to your specific application's recommended grease type.

Priming typically involves engaging the follower rod and operating the trigger or a specific priming mechanism to draw grease into the barrel and expel air. Consult your user manual for exact priming steps for the XPSERIES model.

Battery life varies depending on the speed setting, grease viscosity, and application. A fully charged 20V battery is designed to provide ample runtime for typical professional use, but specific hours depend on usage patterns.

Yes, this grease gun is designed to work with Lumberjack Tools' 20V battery system, so batteries from other compatible Lumberjack 20V tools should work.

It is recommended to wipe down the exterior and coupler after each use. Perform a more thorough cleaning of accessible parts as needed, or as indicated in the user manual, to maintain optimal performance.

The Lumberjack Tools 20V XPSERIES Grease Gun has a maximum operating pressure of 9000 PSI.

Check if the battery is charged and properly seated. Ensure the grease cartridge is loaded correctly and the follower rod is engaged. Bleed any air from the system by following the priming instructions in the manual.

Verify the selected speed setting. Ensure the battery is sufficiently charged. Check the coupler for blockages or leaks. If using a cartridge, ensure it's not empty and properly seated.

Inspect the hose and coupler for cracks or damage. Tighten connections at both ends. If the coupler is faulty, it may need replacement.

Ensure the battery is correctly placed in the charger. Check if the charger is plugged into a working outlet. Clean the battery and charger terminals if they appear dirty.