Mercury Power Inverter - 150W - 12V
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Mercury Power Inverter (150W, 12V) is designed for individuals needing to power standard 230V mains equipment from a 12V battery source, ideal for camping trips, commercial vehicles, or emergency backup power. Its key benefit is providing versatile power on the go with high efficiency. However, it is not recommended for voltage-sensitive electronics or audio equipment due to its modified sine wave output.
All features
| Model Part Number | IMS150-12 |
|---|---|
| Brand | Mercury |
Extended Product Information
FAQs
What type of sine wave does this inverter produce?
This inverter produces a modified sine wave. It is suitable for most standard AC appliances but not recommended for voltage-sensitive electronics or audio equipment.
What is the maximum wattage this inverter can handle?
The inverter is rated for a continuous load of 150 watts. Always check the wattage of your appliance to ensure it does not exceed this limit.
Can I use this inverter to power a laptop?
Yes, most standard laptop chargers can be powered by this inverter. However, always check your laptop charger's wattage requirement.
How do I connect the inverter to my battery?
Connect the inverter's positive terminal to the battery's positive terminal and the inverter's negative terminal to the battery's negative terminal using appropriate gauge cables. Ensure the battery is disconnected during connection.
What should I do if the inverter's alarm sounds?
The alarm indicates a fault condition such as overload, low voltage, or high temperature. Disconnect the load, check the connected device's wattage, ensure proper ventilation, and verify battery voltage.
Can I use this inverter for medical equipment?
No, this inverter is not recommended for voltage-sensitive devices such as medical equipment due to its modified sine wave output.
How efficient is this power inverter?
The Mercury Power Inverter boasts an efficiency of over 85%, meaning more of your battery's power is converted into usable AC power for your devices.
Troubleshooting
Inverter does not turn on
Check that the battery connections are secure and correct (positive to positive, negative to negative). Ensure the battery has sufficient charge. Verify the input voltage is within the 12V range.
Overload or overheat alarm/indicator is active
Disconnect the connected appliance. Ensure the appliance's wattage does not exceed the inverter's 150W rating. Check for blockages in the inverter's ventilation slots and allow it to cool down before restarting. Reduce the load if multiple devices are connected.
Low/Over voltage protection is active
Check the battery voltage. If it's too low, recharge or replace the battery. If it's too high, the battery charging system may be faulty. Ensure the battery is within the acceptable operating range for the inverter.
Connected appliance does not work correctly or at all
This inverter uses a modified sine wave, which is incompatible with certain sensitive electronics or audio equipment. Check if your appliance requires a pure sine wave output. Try a different, simpler AC device to test functionality.
USB port not providing power
Ensure the inverter is powered on and receiving adequate input voltage. The USB port is designed for low-power devices; check the device's power requirements.
Pros and Cons
Pros
- Versatile power solution for 12V systems.
- High efficiency (over 85%) saves battery power.
- Protects against common electrical faults.
- Includes a convenient USB charging port.
- Soft start feature for inductive loads.
Cons
- Modified sine wave output is not suitable for sensitive electronics.
- Not recommended for audio equipment.
- 150W output limits the types of devices that can be powered.
Setup, Compatibility & Care
Setup:
- Connect to Battery: Ensure your 12V battery is disconnected before making connections. Connect the positive (+) terminal of the inverter to the positive terminal of the battery using appropriate gauge cables. Connect the negative (-) terminal of the inverter to the negative terminal of the battery.
- Secure Connections: Ensure all connections are tight and secure to prevent power loss or overheating.
- Placement: Place the inverter in a cool, dry, and well-ventilated area, away from direct sunlight and flammable materials. Ensure adequate airflow around the unit.
- Connect Load: Once connections are secure and the inverter is powered on (check LED indicators), plug your 230V appliance into the inverter's outlet.
Compatibility:
- Input Voltage: Designed for 12V DC battery systems.
- Output Voltage: Provides 230V AC (modified sine wave).
- Maximum Load: Suitable for continuous loads up to 150W. Check the wattage requirements of your devices before connecting. Devices with high surge requirements (e.g., refrigerators, power tools) may exceed the inverter's capacity.
- Recommended Devices: Standard AC appliances, LED lights, phone chargers, laptop chargers, fans.
- Not Recommended For: Sensitive electronics, audio equipment, medical devices, devices with complex power supplies, or items requiring a pure sine wave.
Care:
- Cleaning: Disconnect from the power source before cleaning. Wipe the exterior with a soft, dry or slightly damp cloth. Do not use solvents or abrasive cleaners.
- Ventilation: Ensure the inverter's ventilation slots are kept clear of dust and debris.
- Storage: Store in a cool, dry place when not in use.